Product Description
Wilden P2 Clamped Metal Pump for Industrial Transfer
The Wilden P2 Clamped Metal Pump is a 25 mm (1-inch) air-operated double-diaphragm pump developed for general industrial fluid-transfer applications. Its rugged metal construction supports dependable operation in compact process systems.
Moreover, the clamp-band design provides quick access to internal components. Consequently, technicians can complete inspection, cleaning and routine servicing with less dismantling time.
Wilden P2 Metal Pump Flow and Pressure
Maximum published flow depends on the selected diaphragm:
- Rubber: Up to 172 lpm
- TPE: Up to 171 lpm
- Full-Stroke PTFE: Up to 167 lpm
- Reduced-Stroke PTFE: Up to 155 lpm
In addition, maximum discharge pressure reaches 8.6 bar or 125 psi. However, actual output depends on compressed-air volume, liquid viscosity, discharge pressure, suction conditions and piping resistance.
Therefore, users should select the P2 AODD pump from the relevant performance curve rather than relying only on the maximum flow figure.
Key Features and Benefits
The Wilden Pro-Flo metal pump provides:
- 25 mm or 1-inch liquid inlet
- 19 mm or ¾-inch liquid discharge
- ¼-inch FNPT compressed-air inlet
- Maximum flow up to 172 lpm
- Maximum pressure of 8.6 bar
- Solids passage up to 3.2 mm
- NPT or BSPT threaded connections
- Aluminium or stainless-steel wetted housings
- Rubber, TPE and PTFE diaphragm options
- Clamp bands for faster maintenance
- Lube-free pneumatic operation
- Simple installation and servicing
Together, these features make the Wilden P2 Clamped Metal Pump suitable for transfer, circulation, dewatering and compatible fluids containing small suspended particles.
Pro-Flo Air Distribution System
The P2 metal AODD pump uses the Pro-Flo Air Distribution System for consistent pneumatic cycling through a simple and proven design. Consequently, the pump supports reliable starting and stopping in intermittent or continuous processes.
Moreover, the plastic centre section operates without external airline lubrication. Therefore, facilities can reduce lubricator maintenance and avoid introducing lubricant into the compressed-air exhaust.
As a result, the Wilden P2 pump provides straightforward pneumatic operation for general industrial fluid-transfer duties.
Clamped Metal Pump Maintenance
Clamp bands secure the pump manifolds, liquid chambers and centre section. Consequently, technicians can dismantle and reassemble the pump using a single tool.
Moreover, faster access to diaphragms, valve balls and valve seats can reduce planned maintenance time. Therefore, the Wilden P2 Clamped Metal Pump suits facilities where regular inspection, cleaning or rapid repair is important.
P2 Metal Housing Options
The P2 metal pump is available with two principal wetted-housing materials:
- Aluminium: Lightweight construction for compatible general industrial liquids
- Stainless steel: Corrosion-resistant construction for many compatible chemicals and process fluids
However, neither material is suitable for every liquid. Therefore, users should verify the chemical composition, concentration, operating temperature and abrasiveness before selecting the pump.
Diaphragm and Elastomer Options
The P2 AODD pump supports:
- Rubber diaphragms
- TPE diaphragms
- Full-Stroke PTFE diaphragms
- Reduced-Stroke PTFE diaphragms
Available elastomer materials may include:
- Buna-N
- EPDM
- FKM
- Geolast
- Neoprene
- PTFE
- Saniflex
- Wil-Flex
Each material provides different chemical, temperature, flexibility and abrasion characteristics. Consequently, the diaphragms, valve balls, valve seats and seals should all match the transferred liquid and operating conditions.
Threaded P2 Pump Connections
The Wilden P2 Clamped Metal Pump uses a 1-inch threaded liquid inlet and a ¾-inch threaded discharge. NPT and BSPT connection standards are available.
Therefore, the pump can integrate with compact industrial piping, flexible hoses and equipment skids. However, users should confirm both connection sizes, the required thread standard and compatible sealing material before installation.
Solids Handling and Suction Lift
The Pro-Flo P2 can pass compatible solids measuring up to 3.2 mm or ⅛ inch. As a result, it may transfer selected fluids containing small suspended particles.
Maximum published dry suction lift reaches:
- Rubber: Up to 5.2 metres
- TPE: Up to 7.6 metres
- Full-Stroke PTFE: Up to 4.7 metres
- Reduced-Stroke PTFE: Up to 2.8 metres
Meanwhile, maximum wet suction lift reaches approximately 9 metres.
However, fluid viscosity, inlet restrictions, installation elevation, compressed-air capacity and operating speed affect actual suction performance.
Wilden P2 Applications in India
The Wilden P2 Clamped Metal Pump may support industrial applications across India such as:
- Industrial dewatering
- Paint and coating transfer
- Ceramic-process liquids
- Chemical processing
- Water and wastewater treatment
- Tank and container unloading
- Oils and lubricants
- Adhesives and sealants
- Equipment-skid circulation
- General industrial fluid transfer
For example, an aluminium P2 pump may suit compatible coatings, oils and utility fluids. Alternatively, a stainless-steel configuration may support selected corrosive liquids after a complete material-compatibility review.
Moreover, its compact size can make the pump suitable for equipment skids and installations with limited available space.
Selecting the Correct Wilden P2 Pump
Correct selection depends on:
- Required flow and discharge pressure
- Fluid composition and concentration
- Operating temperature
- Liquid viscosity
- Abrasiveness
- Particle size and concentration
- Aluminium or stainless-steel housing
- Diaphragm and valve materials
- NPT or BSPT connection standard
- Suction conditions
- Available compressed-air pressure and volume
Therefore, users should configure the Wilden P2 Clamped Metal Pump around the complete hydraulic and process duty.
Otherwise, incompatible materials may cause premature wear. Similarly, insufficient compressed-air capacity or unsuitable suction conditions may reduce output, efficiency and component life.
Why Choose the Wilden Pro-Flo P2?
The Wilden Pro-Flo P2 combines proven metal construction with rapid clamp-band maintenance and dependable lube-free pneumatic operation.
Moreover, its compact dimensions, strong suction capability and varied diaphragm options support many general industrial processes. Consequently, this 1-inch AODD pump provides a practical solution for facilities across India requiring reliable fluid transfer and straightforward servicing.
Product Enquiries in India
The Wilden P2 Clamped Metal Pump is presented through Pumps Bharat for dewatering, coatings, ceramic processing, chemical applications, wastewater treatment, lubricant handling and general industrial fluid-transfer duties across India.
When submitting an enquiry, please provide the liquid, operating temperature, required flow, discharge pressure, solids content, preferred housing material and available compressed-air supply. With this information, the available P2 pump configurations can be evaluated against the application requirements.