Product Description
E Series Centrifugal Pumps
E Series Centrifugal Pumps provide efficient water and compatible liquid transfer for industrial, commercial and building-services applications across India. Stanflo designs the range as horizontal, single-stage end-suction pumps that comply with DIN 24255 dimensional and performance requirements.
Moreover, the series covers a broad hydraulic range. Therefore, engineers can select suitable models for water supply, cooling, irrigation, pressure boosting and industrial circulation systems.
Reliable End-Suction Pumping Performance
The E Series uses an end-suction inlet with a vertical centreline discharge. This arrangement supports smooth liquid entry into the impeller while simplifying connection to conventional pipework.
In addition, the double-shrouded impeller uses balancing back vanes. Consequently, the design helps control hydraulic loads during operation.
The volute casing also contains a replaceable wear ring. Therefore, technicians can replace a wear component rather than allowing unnecessary wear to affect the main casing.
Key Features and Benefits
The E Series Centrifugal Pumps provide:
- Horizontal single-stage end-suction design
- DIN 24255 dimensional standard
- Back pull-out construction
- Double-shrouded impeller
- Balancing back vanes
- Replaceable casing wear ring
- Standard mechanical shaft seal
- Optional gland packing
- Flexible casing and impeller materials
- Heavy-duty bearing options
- Flow rates up to 1,100 m³/h
- Heads up to 150 metres
- Temperature options up to 150°C
- Casing pressure options up to 16 bar
Together, these features support efficient water transfer, circulation and pressure duties across a broad range of applications.
DIN 24255 Pump Design
Stanflo manufactures the E Series according to DIN 24255 requirements. Therefore, the pumps follow recognised dimensional and hydraulic design principles for end-suction centrifugal pumps.
Furthermore, the standardised arrangement can simplify pump selection, plant layout and future maintenance.
Back Pull-Out Construction
The back pull-out design allows technicians to remove the rotating assembly without disconnecting the main pump casing from the pipework.
As a result, maintenance teams can access the shaft, bearings, seal and impeller more efficiently. Moreover, installations using a spacer coupling may allow pump servicing without moving the motor.
Consequently, the E Series Centrifugal Pumps can help reduce maintenance downtime in industrial and building-services systems.
Flexible Material Options
Standard configurations use a cast-iron casing, bronze impeller and SUS 420 stainless-steel shaft.
However, Stanflo also lists optional cast-iron and stainless-steel impellers, together with bronze and stainless-steel casing options.
Therefore, engineers can match pump materials to the liquid and operating environment. Nevertheless, users should confirm chemical compatibility, corrosion risk and temperature before final selection.
Seal and Bearing Options
The standard E Series uses a mechanical shaft seal. Alternatively, selected applications can use gland packing.
Moreover, the range incorporates grease-lubricated bearing arrangements. Stanflo also offers reinforced bearings and larger pedestal-housing options for demanding duties.
Therefore, the pump can be configured for different operating and maintenance requirements.
E Series Performance Range
Published range-wide performance includes:
- Flow rate: 2 to 1,100 m³/h
- Total head: 2 to 150 metres
- Speed at 50 Hz: 1,450 to 2,900 rpm
- Speed at 60 Hz: 2,900 to 3,500 rpm
- Standard liquid temperature: -10°C to 105°C
- Optional temperature capability: Up to 150°C
- Standard casing pressure: 10 bar
- Optional casing pressure: 16 bar
Therefore, E Series Centrifugal Pumps can support compact circulation duties as well as larger industrial water-transfer systems.
However, maximum figures do not apply simultaneously to every model. Consequently, engineers should select the exact pump from its official hydraulic performance curve.
E Series Centrifugal Pump Applications in India
The E Series Centrifugal Pumps may support applications across India such as:
- Water supply systems
- Air-conditioning and HVAC systems
- Chilled-water circulation
- Cooling and condenser water
- Heating-water circulation
- Agricultural irrigation
- Pressure boosting
- Industrial water transfer
- Plumbing systems
- General dewatering
- Process-water circulation
- Building-services systems
Suitable configurations may also support fire-water duties. However, engineers must confirm that the complete pumping system meets all required project standards, certifications and applicable fire-safety approvals.
Suitable Pumped Liquids
The E Series primarily handles water and similar compatible liquids.
Therefore, the pumped liquid should remain reasonably clean and chemically suitable for the selected casing, impeller, shaft and seal materials.
Because the range uses an end-suction design rather than a self-priming arrangement, installations generally require flooded suction or another suitable priming method.
Selecting the Correct E Series Pump
Correct selection depends on:
- Required flow rate
- Total dynamic head
- Liquid temperature
- Operating pressure
- Suction conditions
- Material compatibility
- Motor speed and frequency
- Seal arrangement
- Continuous operating duty
- Maintenance access
In addition, engineers should review cavitation risk and available net positive suction head.
Therefore, users should select E Series Centrifugal Pumps from model-specific hydraulic and technical data. Correct selection helps improve efficiency while reducing vibration, seal wear and hydraulic damage.
Product Enquiries in India
The E Series Centrifugal Pumps are presented through Pumps Bharat for HVAC, water supply, industrial circulation, irrigation, pressure boosting and other centrifugal pumping applications across India.
When submitting an enquiry, please provide the required flow, total head, liquid temperature, suction conditions, operating pressure, material requirements and electrical supply. Consequently, the available Stanflo E Series configurations can be evaluated against the application requirements.